移动通信网 程然
欧空局(ESA)的DRACO任务即将把一次"毁灭"变成一堂价值极高的物理课。这颗全称为"破坏性再入评估容器对象"(Destructive Reentry Assessment Container Object)的航天器计划于2027年发射升空,其任务目标颇为反直觉:主动再入地球大气层并解体,同时让约200个传感器和4台相机完整记录航天器解体全过程。而要让这些来之不易的数据安全"回家",葡萄牙Amorim Cork Solutions的P50软木基热防护材料将承担守护者的角色。
让航天器解体,让数据幸存
DRACO任务的核心工程挑战在于矛盾的架构设计:外层航天器被设计为在再入过程中逐步解体,而内部一个直径40厘米的生存舱必须坚持足够长的时间,以保存并回传关键科学数据。再入过程中,传感器和相机采集的数据将在轨处理,最有价值的信息将被转移到生存舱内,随后通过其防热罩的保护穿越最严酷的气动热阶段。
负责生存舱设计、气动热力学及热防护开发验证的冯·卡门流体力学研究所(VKI)最终选择了Amorim P50作为防热罩材料。这是一种轻质软木基烧蚀热防护材料,专为苛刻的航天环境打造。VKI气动热化学研究专家Bernd Helber博士表示,团队在DRACO项目中对P50进行了广泛测试,结果显示它是一种高隔热性、坚固且性能可预测的烧蚀材料,并且可以在商业市场上直接获得——这一点对于供应链稳定性而言不容忽视。
【关键数据】
- 发射时间: 2027年
- 传感器规模: 约200个传感器与4台相机
- 生存舱尺寸: 直径40厘米
- 合作年限: Amorim与VKI在气动热力学领域合作约15年
等离子风洞里的预演
在任务实施前,生存舱的热防护系统已在VKI完成了实验验证。团队将一个半比例的舱体模型置于VKI设施的等离子流中,重现大气再入期间的关键气动热环境,从而在全尺寸舱体制造前评估防热罩及整体热防护设计的可靠性。这不是P50第一次参与实验性再入航天器——此前VKI开发的再入数据采集立方星QARMAN同样选用了这款材料,DRACO可视为双方长达约15年合作的新篇章。
Amorim Cork Solutions全球技术与产品经理Sofia Paix?o对此评价道:DRACO是一项非凡的工程挑战——设计一个注定解体的航天器,同时确保这一过程中产生的知识能够幸存下来。软木的天然隔热特性与工程化处理相结合,使这类材料在极端航天环境下具备独特的应用价值。
从毁灭中汲取知识
DRACO采集的数据将为航天器结构与材料在再入过程中的行为提供一手洞察,帮助改进再入模型,并支撑ESA"可焚毁设计"(Design for Demise)理念的发展——即让航天器在再入时解体得更彻底,降低残存碎片对地面构成的风险。这一任务同时服务于ESA更宏观的"零碎片"(Zero Debris)战略,该战略目标是在2030年前显著减少地球与月球轨道上新碎片的产生。对Amorim而言,DRACO进一步验证了软木基热防护材料在高端航天应用中的地位。随着全球太空可持续性监管趋严,如何让航天器"死得干净"正在成为新的技术竞争点,而这类再入实测数据正是填补模型空白的关键拼图。
出处:Cork Takes the Heat So DRACO’s Data Can Survive
英文原文Mozelos, Portugal, September 2, 2026
–
Amorim Cork Solutions is contributing its P50 cork-based thermal protection material to DRACO, a European Space Agency (ESA) mission designed to capture rare in-flight data on how satellites break apart during atmospheric reentry.
Scheduled for launch in 2027, DRACO, short for Destructive Reentry Assessment Container Object, will deliberately reenter Earth’s atmosphere and break apart. Around 200 sensors and four cameras will record what happens to the spacecraft throughout the process, generating data that could help improve reentry models and support the development of safer, more sustainable spacecraft.
At the heart of this unusual engineering challenge is a 40 cm survival capsule. While the spacecraft around it is designed to break apart, the capsule must survive long enough to preserve and transmit the mission’s critical scientific data. Its heat shield will use Amorim P50, a cork-based ablative thermal protection material developed for demanding aerospace environments.
Protecting what must survive
During reentry, DRACO will encounter intense thermal and mechanical conditions as the spacecraft progressively breaks apart. Data collected by its sensors and cameras will be processed onboard, with the most valuable information transferred to the survival capsule.
Protecting that capsule is therefore essential to the mission.
The von Karman Institute for Fluid Dynamics (VKI), which is responsible for key aspects of the capsule’s design, aerothermodynamics, and thermal protection development and validation, selected Amorim P50 for its heat shield.
P50 is a lightweight, cork-based ablative material designed to provide thermal protection in demanding aerospace applications. Its selection for DRACO builds on approximately 15 years of collaboration between Amorim and VKI in the field of aerothermodynamics and thermal protection.
“DRACO represents a remarkable engineering challenge: designing a spacecraft to break apart while ensuring that the knowledge generated during that process survives,” said Sofia Paix?o, Global Technical & Product Manager at Amorim Cork Solutions. “We are proud to see Amorim P50 contributing to that challenge and to a mission that could deepen our understanding of atmospheric reentry and help inform the design of future spacecraft.”
Tested under reentry-like conditions
Ahead of the mission, the capsule’s thermal protection system has undergone experimental validation at VKI.
A half-scale version of the capsule was exposed to plasma flows in VKI’s facilities to reproduce key aspects of the aerothermal environment expected during atmospheric reentry. The tests allowed the team to evaluate the heat shield and overall thermal protection design under reentry-like conditions before progressing toward the full-scale capsule.
“We have extensively tested P50 within the DRACO programme. It is a highly insulating, robust, and predictable ablative material that is readily available on the commercial market,” said Dr. Bernd Helber, Research Expert in Aerothermochemistry at the von Karman Institute for Fluid Dynamics (VKI).
The DRACO mission is not the first time Amorim P50 has been used by VKI for an experimental reentry spacecraft. The material was previously selected for QARMAN, the QubeSat for Aerothermodynamic Research and Measurements on AblatioN, developed by VKI to collect data during atmospheric reentry.
DRACO marks the next chapter in this long-standing collaboration, bringing cork-based thermal protection technology to a new European mission with an ambitious scientific objective.
Turning destruction into knowledge
Once DRACO begins its final descent, its sensors and cameras will document the spacecraft’s breakup and transfer the most important information to the protected capsule.
The data collected by DRACO is expected to provide valuable insight into how spacecraft structures and materials behave during atmospheric reentry. The findings will help improve reentry models and support ESA’s work on Design for Demise, an approach aimed at designing spacecraft so that they break up more completely during reentry, reducing the risk posed by surviving debris.
The mission contributes to ESA’s broader Zero Debris approach, which aims to significantly reduce the creation of debris in Earth and lunar orbits by 2030.
For Amorim Cork Solutions, DRACO further demonstrates the role cork-based thermal protection materials can play in demanding space applications, combining the natural thermal properties of cork with engineered solutions developed to perform under extreme conditions.
Related