DC-HSDPA与HSDPA区别
DC-HSDPA与HSDPA区别
我要回答
问题答案
回答者:qwerrazxs 回答时间:2012-08-28 00:19
1、
HSDPA(High Speed Downlink Packet Access)高速下行分组接入,是一种移动通信协议,亦称为3.5G(3½G)。该协议在WCDMA下行链路中提供分组数据业务,在一个5MHz载波上的传输速率可达8-10 Mbit/s(如采用MIMO技术,则可达20 Mbit/s)。在具体实现中,采用了自适应调制和编码(AMC)、多输入多输出(MIMO)、混合自动重传请求(HARQ)、快速调度、快速小区选择等技术。
2、 Dual-Cell HSDPA (also known as: Dual-Carrier HSPA or Dual-Cell HSPA) is a wireless broadband standard based on HSPA that is defined in 3GPP UMTS release 8.
Dual Cell (DC- )HSDPA is the natural evolution of HSPA by means of carrier aggregation in the downlink[1]. UMTS licenses are often issued as 10 or 15 MHz paired spectrum allocations. The basic idea of the multicarrier feature is to achieve better resource utilization and spectrum efficiency by means of joint resource allocation and load balancing across the downlink carriers.
An advanced HSPA network can theoretically support up to 28 Mbit/s and 42 Mbit/s with a single 5 MHz carrier for Rel7 (MIMO with 16QAM) and Rel8 (64-QAM + MIMO), in good channel condition with low correlation between transmit antennas. An alternative method to double the data rates is to double the bandwidth, i.e. 10 MHz by using DC-HSDPA. Additionally, some diversity and joint scheduling gains can also be expected [2] with improved QoS for end users in poor environment conditions where existing techniques such as MIMO spatial multiplexing cannot be used to increase data rates. In 3GPP a study item was completed in June 2008. The outcome can be found in a technical report [3]. New HSDPA UE categories 21-24 have been introduced that support DC-HSDPA. DC-HSDPA can support up to 42Mbit/s, but unlike HSPA, it does not need to rely on MIMO transmission.
From Release 9 onwards it will be possible to use DC-HSDPA in combination with MIMO used on both carrier[4]. The support of MIMO in combination with DC-HSDPA will allow operators deploying Release 7 MIMO to benefit from the DC-HSDPA functionality as defined in Release 8. While in Release 8 DC-HSPDA can only operate on adjacent carriers, Release 9 allow that the paired cells can operate on two different frequency bands.
【中文介绍http://www.mscbsc.com/bbs/thread-264251-1-1.html】
HSDPA(High Speed Downlink Packet Access)高速下行分组接入,是一种移动通信协议,亦称为3.5G(3½G)。该协议在WCDMA下行链路中提供分组数据业务,在一个5MHz载波上的传输速率可达8-10 Mbit/s(如采用MIMO技术,则可达20 Mbit/s)。在具体实现中,采用了自适应调制和编码(AMC)、多输入多输出(MIMO)、混合自动重传请求(HARQ)、快速调度、快速小区选择等技术。
2、 Dual-Cell HSDPA (also known as: Dual-Carrier HSPA or Dual-Cell HSPA) is a wireless broadband standard based on HSPA that is defined in 3GPP UMTS release 8.
Dual Cell (
An advanced HSPA network can theoretically support up to 28 Mbit/s and 42 Mbit/s with a single 5 MHz carrier for Rel7 (MIMO with 16QAM) and Rel8 (64-QAM + MIMO), in good channel condition with low correlation between transmit antennas. An alternative method to double the data rates is to double the bandwidth, i.e. 10 MHz by using DC-HSDPA. Additionally, some diversity and joint scheduling gains can also be expected [2] with improved QoS for end users in poor environment conditions where existing techniques such as MIMO spatial multiplexing cannot be used to increase data rates. In 3GPP a study item was completed in June 2008. The outcome can be found in a technical report [3]. New HSDPA UE categories 21-24 have been introduced that support DC-HSDPA. DC-HSDPA can support up to 42Mbit/s, but unlike HSPA, it does not need to rely on MIMO transmission.
From Release 9 onwards it will be possible to use DC-HSDPA in combination with MIMO used on both carrier[4]. The support of MIMO in combination with DC-HSDPA will allow operators deploying Release 7 MIMO to benefit from the DC-HSDPA functionality as defined in Release 8. While in Release 8 DC-HSPDA can only operate on adjacent carriers, Release 9 allow that the paired cells can operate on two different frequency bands.
【中文介绍http://www.mscbsc.com/bbs/thread-264251-1-1.html】
HSDPA就是普通的R5/R6版本的数据业务。用单载波的HS-DSCH信道承载数据业务。
DC-HSDPA就是用2个载波的HS-DSCH信道承载数据,要求是这两个载波的带宽间隔是相邻的,也就是5Mhz,配置主辅载波,一般低载频的配为住载频,高载频的配为辅载频。福载波只有业务信道没有公共信道。一般速率能提高1倍,最高能达到43Mbps。
DC-HSDPA就是用2个载波的HS-DSCH信道承载数据,要求是这两个载波的带宽间隔是相邻的,也就是5Mhz,配置主辅载波,一般低载频的配为住载频,高载频的配为辅载频。福载波只有业务信道没有公共信道。一般速率能提高1倍,最高能达到43Mbps。
回答者:Richer 回答时间:2012-08-28 00:51
目前有哪些设备厂家支持该技术?
那些踩的人,好歹说出你踩的理由啊,除了最高速率有点出入以外我觉得没什么问题,应该是42Mbps


