 |
善于提问，勤于回答，你也是专家
|
 |
爱立信2206设备出现定时装置VCO故障，该怎么处理
我要回答
问题答案
SO CF I1A:8 - Timing Unit VCO Fault
Related RUs SO CF RU:0 - DXU, DUG 10, DUG 20, MU or IXU
Page 30
SO CF RU:2 - Micro RBS Page 30
Description The VCO is failing, probably because of a power supply
problem or a hardware fault.
If a large number of RBSs raise the alarm, the fault is
probably located in the PCM or External References.
Action Follow the instructions below until the fault is resolved.
• Check that the RBS receives the correct
synchronization signals according to configuration.
• Reset the IXU/MU/Micro (master cabinet).
• Replace the IXU/MU/Micro (master cabinet).
硬件或传输的问题吧
回答者：wawt 回答时间：2016-11-01 15:08
0
0