问题已开启
(普通问题)
usedFreqThresh2dRscpdrnc与usedFreqThresh2dRscp的区别,爱立信参数
usedFreqThresh2dRscpdrnc与usedFreqThresh2dRscp的区别
提问者: nsgpboy 提问时间: 2013-11-23
• 爱立信5G如何LMT登录 2020-07-15
• 爱立信MSC退网流程 2020-05-07
• 爱立信CQI优化有没有什么参数可以修改? 2020-01-08
• 爱立信volte语音说话模糊,听不清,从哪方面着手处理? 2019-12-17
• 爱立信NRO,NDO是什么的缩写 2019-12-10
• win10系统爱立信帮助文件库Alex无法使用 2019-12-06
• 有没有爱立信基站技术交流群 2019-10-24
• 爱立信核心网网管OSS-RC 2019-09-27
• 爱立信MSC退网流程 2020-05-07
• 爱立信CQI优化有没有什么参数可以修改? 2020-01-08
• 爱立信volte语音说话模糊,听不清,从哪方面着手处理? 2019-12-17
• 爱立信NRO,NDO是什么的缩写 2019-12-10
• win10系统爱立信帮助文件库Alex无法使用 2019-12-06
• 有没有爱立信基站技术交流群 2019-10-24
• 爱立信核心网网管OSS-RC 2019-09-27
问题答案
( 2 )
usedFreqThresh2dRscp = -100 { -115..-25 } Threshold for event 2d for the
used frequency when the measurement quantity is RSCP.
usedFreqThresh2dEcnoDrnc = -12 { -24..0 }
Threshold for event 2d for the used frequency for cells located in DRNC when the measurement quantity is Ec/No.
Note: This parameter is also used for calculation of a threshold value for the used frequency for 2f events. The calculated value is sent to the UE in a RRC Measurement Control message. If the sum of the calculation
(usedFreqRelThresh2fEcno + usedFreqThresh2dEcnoDrnc) exceeds the maximum 3GPP value 0 dB, the value sent to the UE will be 0 dB.
Unit: dB
Change takes effect: Ongoing connections (next time that 2d/2f measurements are started or modified)
used frequency when the measurement quantity is RSCP.
usedFreqThresh2dEcnoDrnc = -12 { -24..0 }
Threshold for event 2d for the used frequency for cells located in DRNC when the measurement quantity is Ec/No.
Note: This parameter is also used for calculation of a threshold value for the used frequency for 2f events. The calculated value is sent to the UE in a RRC Measurement Control message. If the sum of the calculation
(usedFreqRelThresh2fEcno + usedFreqThresh2dEcnoDrnc) exceeds the maximum 3GPP value 0 dB, the value sent to the UE will be 0 dB.
Unit: dB
Change takes effect: Ongoing connections (next time that 2d/2f measurements are started or modified)
回答者:
OscarDon
回答时间:2013-11-23 20:17
15 14
usedFreqThresh2dRscpdrnc与usedFreqThresh2dRscp都是针对RSCP测量的起压门限。区别在于,usedFreqThresh2dRscpdrnc是面向RNC进行统一配置。而usedFreqThresh2dRscp是针对小区进行配置。且,当配置小区级usedFreqThresh2dRscp时,RSCP 2D门限以小区级为准。
回答者:
duanbiao2008
回答时间:2013-11-29 09:09
16 17
联系我们 - 问通信专家 | Powered by MSCBSC 移动通信网 © 2006 - |