ÎÊÌâÒÑ¿ªÆô
(ÆÕͨÎÊÌâ)
ÇëÎÊLTEÖÐRN ReconfigurationÊÇʲôÒâ˼£¿
• Õë¶ÔLTER8Öնˣ¬ÖØÑ¡µ½±È·þÎñСÇøÓÅÏȼ¶µÍµÄE-UTRANƵµã»òRATϵͳµÄСÇøÉϵÄÌõ¼þ°üÀ¨ÏÂÊöÄÄЩ£¿£¨£© 2017-08-29
• LTEÏò¶à¸öÕ¾¼äÄ¿±êСÇøÇл»Ê§°Ü 2017-05-23
• LTEÖÐÒ»Ö±³öÏÖpaging £¬measurement report ºÍrrc CONnectION rECOnfiguRATIONÊÇÊôÓÚÒì³£Çé¿öô£¿Õâ¸ö¶ÔÓÚÏÂÔØËÙÂÊÓÐÓ°Ïìô£¿ 2016-06-28
• ¸ßÌú³¡¾°ÏÂLTE»ùÕ¾ÔÚ½ÓÈëʱÎÞÏÞÏ·¢rrcCONnectIONRECOnfiguRATIONÏûÏ¢£¬Çë´óÉñÖ¸µ¼£¡£¡ 2016-03-16
• ÔÚLTEÖУ¬¸÷¸örrcCONnectIONRECOnfiguRATIONµÄ¾ßÌå×÷ÓÃÊÇʲô£¿ 2015-08-04
• LTE²ãÈýÐÅÁîRRCCONnectIONRECOnfiguRATIONÖеIJâÁ¿Ê¼þÎÊÌâ 2015-05-29
• TDLTEÓйØprachCONFiguRATIONIndexÎÊÌâ 2014-08-21
• TDLTEcalibRATION²»´òÓ¡¶¼ÓÐʲôÔÒò 2014-05-09
• LTEÏò¶à¸öÕ¾¼äÄ¿±êСÇøÇл»Ê§°Ü 2017-05-23
• LTEÖÐÒ»Ö±³öÏÖpaging £¬measurement report ºÍrrc CONnectION rECOnfiguRATIONÊÇÊôÓÚÒì³£Çé¿öô£¿Õâ¸ö¶ÔÓÚÏÂÔØËÙÂÊÓÐÓ°Ïìô£¿ 2016-06-28
• ¸ßÌú³¡¾°ÏÂLTE»ùÕ¾ÔÚ½ÓÈëʱÎÞÏÞÏ·¢rrcCONnectIONRECOnfiguRATIONÏûÏ¢£¬Çë´óÉñÖ¸µ¼£¡£¡ 2016-03-16
• ÔÚLTEÖУ¬¸÷¸örrcCONnectIONRECOnfiguRATIONµÄ¾ßÌå×÷ÓÃÊÇʲô£¿ 2015-08-04
• LTE²ãÈýÐÅÁîRRCCONnectIONRECOnfiguRATIONÖеIJâÁ¿Ê¼þÎÊÌâ 2015-05-29
• TDLTEÓйØprachCONFiguRATIONIndexÎÊÌâ 2014-08-21
• TDLTEcalibRATION²»´òÓ¡¶¼ÓÐʲôÔÒò 2014-05-09
ÎÊÌâ´ð°¸
( 2 )
LTE ÖÐ ReconfigurationÓжàÖÖ£º
¡¾1¡¿PHYSICAL CHANNEL RECONFIGURATION
¡¾2¡¿RADIO BEARER RECONFIGURATION
¡¾3¡¿TRANSPORT CHANNEL RECONFIGURATION
Ö÷ÒªÊÇUTRAN ºÍ UE Ö®¼äµÄ Re configuration ÐÉÌ£¡
¡¾1¡¿PHYSICAL CHANNEL RECONFIGURATION
¡¾2¡¿RADIO BEARER RECONFIGURATION
¡¾3¡¿TRANSPORT CHANNEL RECONFIGURATION
Ö÷ÒªÊÇUTRAN ºÍ UE Ö®¼äµÄ Re configuration ÐÉÌ£¡
»Ø´ðÕߣº
orangeqw
»Ø´ðʱ¼ä£º2012-05-22 16:01
![](./images/ding.gif)
![](./images/cai.gif)
RN reconfiguration
The purpose of this procedure is to configure/reconfigure the RN subframe configuration and/or to update the system information relevant for the RN in RRC_CONNECTED.
5.9.1.2 Initiation
E-UTRAN may initiate the RN reconfiguration procedure to an RN in RRC_CONNECTED when AS security has been activated.5.9.1.3 Reception of an RNReconfiguration
The RN shall:1> if the systemInfoChange is included:
2> if the systemInformationBlockType1 is included:
3> act upon the received SystemInformationBlockType1 as specified in 5.2.2.7;
2> if the SystemInformationBlockType2 is included:
3> act upon the received SystemInformationBlockType2 as specified in 5.2.2.9;
1> if the rn-SubframeConfig is included:
2> reconfigure lower layers in accordance with the received FDD-SubframeConfig or TDD-SubframeConfig;
2> if the rpdcch-Config is included:
3> reconfigure lower layers in accordance with the received rpdcch-Config;
1> submit the RNReconfigurationComplete message to lower layers for transmission, upon which the procedure ends;
»Ø´ðÕߣº
xhy1331
»Ø´ðʱ¼ä£º2012-05-22 18:41
![](./images/ding.gif)
![](./images/cai.gif)
ÈçÂ¥ÉÏËù˵£º£¨²¹³ä£©
¡¾1¡¿LTE ÖÐ RN Reconfiguration ÊÇ£ºRelay Node Reconfiguration £¨ÖмÌÖØÅ䣩
¡¾2¡¿Á÷³Ì£º
(1) RNReconfiguration Message (·½Ïò£ºETURAN ---> RN)
The RNReconfiguration is a command to modify the RRC connection between
the RN and the E-UTRAN. It may convey information for the RN subframe
configuration and changed system information.
(2) RNReconfigurationComplete Message (·½Ïò£ºRN--->ETURAN )
The RNReconfigurationComplete message is used to confirm the successful
completion of an RN reconfiguration.
¡¾1¡¿LTE ÖÐ RN Reconfiguration ÊÇ£ºRelay Node Reconfiguration £¨ÖмÌÖØÅ䣩
¡¾2¡¿Á÷³Ì£º
(1) RNReconfiguration Message (·½Ïò£ºETURAN ---> RN)
The RNReconfiguration is a command to modify the RRC connection between
the RN and the E-UTRAN. It may convey information for the RN subframe
configuration and changed system information.
(2) RNReconfigurationComplete Message (·½Ïò£ºRN--->ETURAN )
The RNReconfigurationComplete message is used to confirm the successful
completion of an RN reconfiguration.
orangeqw 2012-05-28 16:32
ÈȵãÎÊÌâ
¸ü¶à¾«²Ê
ÁªÏµÎÒÃÇ - ÎÊͨÐÅר¼Ò | Powered by MSCBSC Òƶ¯Í¨ÐÅÍø © 2006 - |