问题已开启
(普通问题)
掉话问题咨询
在用NPMaster处理掉话时,掉话原因给出DropCall_DueTo_ASU_TimeOut,查看覆盖发现掉话点的小区,RCSP-116dbm,EcIo-24db,且是最后一次软切换最优小区。掉话点有最优小区,不在激活集中,RCSP-99dbm,EcIo-7db;分析应该是切换不及时。但是掉话前的打点消息很奇怪(见下面的回复)
NBAP_RL_RECFG_COMMIT(4) 6.29 second Before IU Release Command
NBAP_RL_RECFG_COMMIT(4) 6.29 second Before IU Release Command
NBAP_COMPRS_MODE_CMD(11) 5.96 second Before IU Release Command
NBAP_COMPRS_MODE_CMD(11) 5.96 second Before IU Release Command
RRC_PH_CH_RECFG_CMP(61) 5.96 second Before IU Release Command
RRC_MEAS_CTRL(9) 5.96 second Before IU Release Command
RRC_MEAS_CTRL(9) 5.96 second Before IU Release Command
NBAP_RL_ADD_REQ(2) RL_ID 02(02) 5.06 second Before IU Release Command
NBAP_RL_ADD_RSP(14) RL_ID 02/RL_SET_ID 03(0203) 5.02 second Before IU Release Command
RRC_ACTIVE_SET_UPDATE(1) 5.02 second Before IU Release Command
RRC_MEAS_CTRL(9) 4.82 second Before IU Release Command
RANAP_IU_RELEASE_REQUEST(19) IU_RADIO_NW_CHOSEN/IU_FAIL_IN_THE_RADIO_ITF_PROC(010e00) 0.02 second Before IU Release Command(后面是RRC等资源释放)
我的疑问是:掉话前启动了压缩模式进行异频测量,那么压缩模式后面的测量报告应该是异频测量控制的相应,且增加的链路应该是异频切换的链路,那为什么会出现RRC_ACTIVE_SET_UPDATE呢?这个消息不是同频软切换的开始吗?难道这是因为这个RRC_ACTIVE_SET_UPDATE是压模前的同频软切换的响应?
等待高人指点.....
NBAP_RL_RECFG_COMMIT(4) 6.29 second Before IU Release Command
NBAP_COMPRS_MODE_CMD(11) 5.96 second Before IU Release Command
NBAP_COMPRS_MODE_CMD(11) 5.96 second Before IU Release Command
RRC_PH_CH_RECFG_CMP(61) 5.96 second Before IU Release Command
RRC_MEAS_CTRL(9) 5.96 second Before IU Release Command
RRC_MEAS_CTRL(9) 5.96 second Before IU Release Command
NBAP_RL_ADD_REQ(2) RL_ID 02(02) 5.06 second Before IU Release Command
NBAP_RL_ADD_RSP(14) RL_ID 02/RL_SET_ID 03(0203) 5.02 second Before IU Release Command
RRC_ACTIVE_SET_UPDATE(1) 5.02 second Before IU Release Command
RRC_MEAS_CTRL(9) 4.82 second Before IU Release Command
RANAP_IU_RELEASE_REQUEST(19) IU_RADIO_NW_CHOSEN/IU_FAIL_IN_THE_RADIO_ITF_PROC(010e00) 0.02 second Before IU Release Command(后面是RRC等资源释放)
我的疑问是:掉话前启动了压缩模式进行异频测量,那么压缩模式后面的测量报告应该是异频测量控制的相应,且增加的链路应该是异频切换的链路,那为什么会出现RRC_ACTIVE_SET_UPDATE呢?这个消息不是同频软切换的开始吗?难道这是因为这个RRC_ACTIVE_SET_UPDATE是压模前的同频软切换的响应?
等待高人指点.....
提问者: chengangguan 提问时间: 2012-01-09
更多
掉话
相关问题
• 各位大神有没有遇见过移动4G套餐升5G后,出现volte掉话以及间断性无服务的问题。 2020-06-03
• 案例如何处理掉话率 2020-03-26
• 如何处理掉话率 2020-03-26
• 造成掉话的原因 2020-03-19
• 掉线和掉话的区别 2020-01-16
• VOLTE测试中发现,鼎力软件掉话上报原因RTP Inactivity,查看信令发现持续20s,RTP包单通,即IMS RTP SN and... 2019-11-25
• volte掉话率是哪个指标 2019-03-26
• volte高掉话怎么算 2019-03-26
• 案例如何处理掉话率 2020-03-26
• 如何处理掉话率 2020-03-26
• 造成掉话的原因 2020-03-19
• 掉线和掉话的区别 2020-01-16
• VOLTE测试中发现,鼎力软件掉话上报原因RTP Inactivity,查看信令发现持续20s,RTP包单通,即IMS RTP SN and... 2019-11-25
• volte掉话率是哪个指标 2019-03-26
• volte高掉话怎么算 2019-03-26
问题答案
( 1 )
联系我们 - 问通信专家 | Powered by MSCBSC 移动通信网 © 2006 - |