本楼为嵌入式软件开发及MPLS应用软件开发
=======================================================
NSN-SH-NGM-ESW1-Application(SDH/ATM/OTN)

Openings: 3

KeyResponsibilities:

Responsible for
developing and maintenance for application software on MSTP telecom provisions
Job Requirements:
B.Sc or M.Sc in computer science or equivalent.
Over 1 yearsembedded system experience on application software developing and maintenance, andbe familiar with C/C++.
Over2yearsexperience in multi-task RTOS (Vxworks is preferred).
Being knowledgeableon protocols of MSTP/SDH is preferred.
NSN-SH-NGM-ESW2-OpticalNetwork Driver Software Engineer
Openings: 2
Job Description:
Be responsible fordriver development for SDH/PDH/DWDM/OTN functions.
Job Requirements:
Experience in RTOS(RT Linux/VxWorks preferred), C/C++ in real time embedded system, anddistributed design, Knowledgeable in the real time software development anddebugging skills;
Hands on experiencein firmware / driver development on Datacom / Telecom equipments;
Knowledgeable inphysical layer or data link layer, especially SDH/SONET/DWDM/OTN and Ethernetover SDH.
Experience indriver development such as SDH Framer, LIU, Cross Connect, equipmentprotection, I2C, etc.
Experience in FPGA,ASIC design is a plus.
NSN-SH-NGM-ESW2- BSPSoftware Engineer-Open


Openings: 1
Job Description:
Responsible forBSP/BSP driver development for telecom equipments.
Responsible for BSPmaintenance for telecom equipments
Job Requirements:
Bachelor or Masterdegree in computer science, telecommunication or equivalent ;
Over 2yearsBSPdevelopment experience based on Vxworks / Linuxand PowerPC series;
Be familiarwith memory controller and BSP driver such as Ethernet driver, Flashdriver, etc.
Be familiarwith CPU peripheral interface, such as I2C, SPI, PCI, etc.
Be familiar withRTOS (Linux is preferred)
StrongEnglish capability (speaking, reading, and writing) is preferred
Professionalknowledge in multi-core (better in PowerPC) is highly preferred.
NSN-SH-NGM-ESW3- ProtocolProgramming

Openings: 1
Job Requirements:
2+ years of professional experience in Embedded Software development,international working experience with European countries or US preferred
Verbal fluency in English and very good skills in written English
Experience in multi-task RTOS (Linux / VxWorks preferred), C/C++, TCP/IP inreal time embedded system, and distributed design.
Hands on experience in firmware / driver development on Datacom / Telecomequipment.
Experience in driver development such as EOS, SDH Framer, LIU, Cross Connect,equipment protection, I2C, etc.
Knowledgeable in Ethernet and related protocol such as LCAS, MSTP, LACP, GVRPand so on.
TDM, SDH, ETH technology and related signaling/protocols for MSTP/MSPP
Proactive, fast learning capability, excellent communication and team workingskills, strong
NSN-SH-NGM-ESW3-DCN

Openings: 1
Job Description

Analysis systemrequirement, software design and coding, testing.

Job Requirements:
Master or Bachelor degree in computer science or telecom
Background of data communication

Knowledge of L2/L3protocols, e.g. PPP/HDLC/IP/OSPF
Hands on experiment of RTOS development, Linux or vxWorks
Ethernet protocol knowledge is a plus

Skills in C/C++ programming

Java experiment is aplus

NGM R&D – Senior MPLS-TPApplication Software Engineer

Key Responsibilities:
l
Keep trace of MPLS-TP standardization progress
l
Support MPLS-TP related requirement definition andclarification
l
Develop MPLS-TP embedded software package
l
Design and implement software modules for new MPLS-TPrelated features
l
Implement unit test, host test, integration test,troubleshooting and issue fixing
Job Requirement:
l
3+ years working experience in telecommunicationsoftware development

l
Deeply understand layer network concept and MPLS-TP/MPLSarchitecture
l
Strong experience in software development on MPLS-TP/MPLSService, OAM, QoS, Restoration etc.
l
Familiar with MPLS-TP/MPLS control plane protocols such asRSVP-TE, T-LDP, OSPF-TE or ISIS-TE etc.
l
Familiar with Ethernet Basic features such as MAC, VLAN,QinQ, LAG, QoS, ACL etc.
l
Familiar with multi-task RTOS (VxWorks or Linux), C/C++,TCP/IP in real time embedded system
l
Prefer to experience in MPLS-TP/MPLS software development onDCL or ZebOS
l
Initiative, fast learning ability
l
Analytical thinking that leads to clear decision-making incomplex situations
l
Creativity and openness to develop new solutions andapproaches
l
Open mindset and good communication in team working
Education/Skills:
l
Bachelor/Master of Science (Electrical Engineering)
l
Fluent English in both speaking and writing




NGM R&D – Senior EthernetApplication Software Engineer
Key Responsibilities:
l
Support Ethernet related requirement definition andclarification
l
Develop Ethernet embedded software package
l
Design and implement software modules for new Ethernetfeatures
l
Maintain the current Ethernet application software modules
l
Implement unit test, host test, integration test,troubleshooting and issue fixing
Job Requirement:
l
3+ years working experience in telecommunication/Datacomsoftware development

l
Deeply understand Ethernet related standardization such asIEEE802.1d, IEEE802.1p, IEEE802.1q, IEEE802.1ad, IEEE802.3, IEEE802.3ad etc.
l
Strong experience in software application development on Ethernetbasic features such as MAC, VLAN, QinQ, LAG, ACL, QoS etc.
l
Strong experience in software application development on Ethernetptotocol such as xSTP, LACP, IGMP Snooping, GARP/GMRP/GVRP, OAM, APS etc.
l
Familiar with multi-task RTOS (VxWorks or Linux), C/C++,TCP/IP in real time embedded system
l
Initiative, fast learning ability
l
Analytical thinking that leads to clear decision-making incomplex situations
l
Creativity and openness to develop new solutions andapproaches
l
Open mindset and good communication in team working

Education/Skills:
l
Bachelor/Master of Science (Electrical Engineering)
l
Fluent English in both speaking and writing
NSN-SH-NGM-ESW4-SeniorMPLS-TP Application Software Engineer
Openings: 2
Key Responsibilities:
Keep trace of MPLS-TP standardization progress

Support MPLS-TP related requirement definition andclarification
Develop MPLS-TP embedded software package
Design and implement software modules for new MPLS-TPrelated features
Implement unit test, host test, integration test, troubleshooting andissue fixing
Job Requirement:
3+ years working experience in telecommunication softwaredevelopment

Deeply understand layer network concept andMPLS-TP/MPLS architecture
Strong experience in software development on MPLS-TP/MPLS Service, OAM,QoS,
Restoration etc.
Familiar with MPLS-TP/MPLS control plane protocols such as RSVP-TE,T-LDP,
OSPF-TE or ISIS-TE etc.
Familiar with Ethernet Basic features such as MAC, VLAN, QinQ, LAG, QoS,ACL etc.
Familiar with multi-task RTOS (VxWorks or Linux), C/C++, TCP/IP in realtime embedded
system
Prefer to experience in MPLS-TP/MPLS software development on DCL orZebOS
Initiative, fast learning ability
Analytical thinking that leads to clear decision-making in complexsituations
Creativity and openness to develop new solutions andapproaches
Open mindset and good communication in team working
Education/Skills:
Bachelor/Master of Science (Electrical Engineering)

Fluent English in both speaking and writing
NSN-SH-NGM-ESW4- GMPLSSoftware Development Engineer

Openings: 2
Job Description:

Be responsible for GMPLS software development onTransport product.
Job Requirement:
Experience in multi-task RTOS (Vxwork or Linux),C/C++, TCP/IP in real time embedded system, and distributed design.
Hands on experience in protocol development onDatacom / Telecom equipment.
Experience in protocol development such as OSPF,RSVP, MPLS and GMPLS etc.
Prefer to experience in GMPLS development or DCLsoftware package development.
Good oral communication skill and read/write skillin English.
GMPLS协议软件开发工程师

职位描述：

负责GMPLS软件的开发

职位要求：

具有多任务实时嵌入式系统（RTOS）下C/C++的开发经验，Linux或者Vxworks；

具有数据通信产品开发的工作经验；

具有协议开发的工作经验，例如：OSPF，RSVP，MPLS和GMPLS等等；

优先考虑有GMPLS开发经验或者DCL代码的开发经验；

良好的英语沟通能力和读写能力。