 |
善于提问，勤于回答，你也是专家
|
 |
usedFreqThresh2dRscpdrnc与usedFreqThresh2dRscp的区别，爱立信参数
usedFreqThresh2dRscpdrnc与usedFreqThresh2dRscp的区别
我要回答
问题答案
usedFreqThresh2dRscp = -100 { -115..-25 } Threshold for event 2d for the
used frequency when the measurement quantity is RSCP.
usedFreqThresh2dEcnoDrnc = -12 { -24..0 }
Threshold for event 2d for the used frequency for cells located in DRNC when the measurement quantity is Ec/No.
Note: This parameter is also used for calculation of a threshold value for the used frequency for 2f events. The calculated value is sent to the UE in a RRC Measurement Control message. If the sum of the calculation
(usedFreqRelThresh2fEcno + usedFreqThresh2dEcnoDrnc) exceeds the maximum 3GPP value 0 dB, the value sent to the UE will be 0 dB.
Unit: dB
Change takes effect: Ongoing connections (next time that 2d/2f measurements are started or modified)
used frequency when the measurement quantity is RSCP.
usedFreqThresh2dEcnoDrnc = -12 { -24..0 }
Threshold for event 2d for the used frequency for cells located in DRNC when the measurement quantity is Ec/No.
Note: This parameter is also used for calculation of a threshold value for the used frequency for 2f events. The calculated value is sent to the UE in a RRC Measurement Control message. If the sum of the calculation
(usedFreqRelThresh2fEcno + usedFreqThresh2dEcnoDrnc) exceeds the maximum 3GPP value 0 dB, the value sent to the UE will be 0 dB.
Unit: dB
Change takes effect: Ongoing connections (next time that 2d/2f measurements are started or modified)
回答者：OscarDon 回答时间：2013-11-23 20:17
15
16英文，看的不太懂，能通俗的解释一下吗
usedFreqThresh2dRscpdrnc与usedFreqThresh2dRscp都是针对RSCP测量的起压门限。区别在于，usedFreqThresh2dRscpdrnc是面向RNC进行统一配置。而usedFreqThresh2dRscp是针对小区进行配置。且，当配置小区级usedFreqThresh2dRscp时，RSCP 2D门限以小区级为准。
回答者：duanbiao2008 回答时间：2013-11-29 09:09
