问题已开启
(普通问题)
关于诺西设备7725告警的问题,求高手指点
近期部分基站割接至新BSC后,这些基站的7725告警接连不断,可是联系工程师检查却总找不到问题,请问该检查哪些数据呢,我感觉应该找这些基站的共性,可是我对BSC不了解,不知道那些部分和7725告警有关,请高手指点
提问者: wanglb85 提问时间: 2011-02-12
• 艾默生停电告警怎么接? 2020-04-09
• 告警不可见怎么设置 2019-11-13
• 中兴的LTE设备处天线校正失败告警怎么处理 2019-09-28
• 射频单元ALD开关配置不匹配告警如何处理 2019-08-02
• FDD小区接收通道干扰噪声功率不平衡告警,具体有哪几种原因造成,解决方案是什么。 2019-07-27
• 无线掉线率差,可以从哪些方面分析如告警、干扰,参数;可以调整哪些参数,请大神具体说明,求教 2019-07-02
• 系统模块告警 2019-06-14
• 不在基站脚底下不是塔下黑,主邻区都没信号,指标是好的,没有基站退服告警,占卜上信号接收不到这是怎么回事? 2019-03-13
• 告警不可见怎么设置 2019-11-13
• 中兴的LTE设备处天线校正失败告警怎么处理 2019-09-28
• 射频单元ALD开关配置不匹配告警如何处理 2019-08-02
• FDD小区接收通道干扰噪声功率不平衡告警,具体有哪几种原因造成,解决方案是什么。 2019-07-27
• 无线掉线率差,可以从哪些方面分析如告警、干扰,参数;可以调整哪些参数,请大神具体说明,求教 2019-07-02
• 系统模块告警 2019-06-14
• 不在基站脚底下不是塔下黑,主邻区都没信号,指标是好的,没有基站退服告警,占卜上信号接收不到这是怎么回事? 2019-03-13
问题答案
( 5 )
7725 TRAFFIC CHANNEL ACTIVATION FAILURE
Meaning
The system has blocked the radio time slot because the call control has failed a number of times in the activation of a radio channel.Supplementary information fields
1 Type of the channel whose TCH activation failed. The channel type can be "TCH", "SDCCH", "Packet Data TCH" or "DTM TCH". The number value "0" indicates "TCH", "1" indicates "SDCCH", "2" indicates "PDTCH" (Packet Data Traffic TCH) and "6" indicates "DTM TCH" (Circuit switched TCH of DTM connection).Instructions
if the failure type is "PDTCH", the alarm is cancelled automatically by the system, when no more failure indications are observed if the channel type is "TCH", "SDCCH" or "DTM TCH", cancel the alarm with the MML command EOR. Deblock the radio time slot by first aligning the TRX in question with the command ERS and then removing the alignment of the TRXCancelling
If the channel type is "TCH", "SDCCH" or "DTM TCH", cancel the alarm with a command before taking the steps described in the INSTRUCTIONS, if the alarm has not been cancelled before. See instructions on base transceiver station alarms handling.
回答者:
nerox
回答时间:2011-02-12 15:42
29 29
处理思路如下:
1、重启GENA
2、重启BCF
3、更换NSEI
4、切换BCSU
按你的情况按照3/4步骤就能解决
1、重启GENA
2、重启BCF
3、更换NSEI
4、切换BCSU
按你的情况按照3/4步骤就能解决
回答者:
tiancao2008
回答时间:2011-02-12 17:46
30 30
这些站是不是集中在某一个或某几个BCSU上,如果是,可能是BCSU负荷过大
回答者:
bean760
回答时间:2011-02-12 22:16
33 29
更换NSEI
回答者:
yjq7030
回答时间:2011-02-18 00:57
31 29
有没有高手,详细的解答下
回答者:
ydtwx
回答时间:2011-02-21 21:01
29 35
联系我们 - 问通信专家 | Powered by MSCBSC 移动通信网 © 2006 - |